FasTop™ M Urethane Mortar Flooring System

Download editable MS Word file format

System Bulletin (Acrobat PDF Format)

Product Description
General Polymers FasTop M URETHANE MORTAR SYSTEM is a low odor, trowel applied mortar system installed at 1/4"-3/8" thickness.  Under normal conditions, FasTop M is and troweled onto the substrate without the use of a primer or topcoat.  FasTop M is designed for conditions requiring rapid installation and protection of the concrete, wood or steel substrate from thermal shock, impact, corrosion, mild chemical attack and abrasion.

FasTop M is textured and provides some skid inhabitance under most wet process conditions, and will remain so throughout the life of the floor.  FasTop M can be used on new concrete, or to restore rough or badly damaged floor surfaces that have been exposed to years of contamination.  FasTop M is extremely durable, and in most cases, has physical characteristics which are approximately double that of concrete.

Advantages

• Minimal downtime, quick turnaround

• Bonds to slightly damp substrate

• Thermal shock resistant

• Unaffected by freeze/thaw cycles

• Wide service temperature range (-50ºF to 300ºF)

• Optional primer and topcoat

• Impact resistant

• Low to no odor, 0 VOC (Volatile Organic Content)

• Interior or exterior use

• USDA accepted for food processing area

• Chemical resistant to:

            28 Day Exposure @ 72ºF             Result           

            Alcohol                                                           NE

            Ethylene Glycol                                              NE

            Fats, Oils & Sugars                                      NE

            Gasoline, Diesel & Kerosine                       NE

            Hydrochloric Acid (<35%)                            NE

            Lactic Acid(milk)                                           NE

            Mineral Oils                                                    NE

            Most Organic Solvents                                 NE

            Muriatic Acid                                                 NE

            Nitric Acid (<10%)                                        NE

                  Nitric Acid (<30%)                             Slight Softening                   

            PM Acetate                                                    NE

            Phosphoric Acid (<50%)                              NE

            Potassium Hydroxide (<50%)                     NE

            Sodium Hydroxide (<50%)                          NE

            Sulfuric Acid (<50%)                         Slight Gloss Loss

            Water                                                              NE

            Xylene                                                            NE

Uses

• Cagewash areas

• Chemical processing plants

• Commercial kitchens

• Dairy plants

• Meat and poultry plants

•  Pulp and paper plants

• Restrooms and concession stands

• Sugar processing plants

• Walk-in coolers

• Walk-thru autoclaves 

Return to top of page.